This High-quality water pump is ideal for vertical hydroponic systems, high vertical gardens and green walls. It lifts water up to 7 Plantsteps® and recycle water in Supragarden® system.

• Flow 3000 L/h

• Max. Lifting capacity of 3 meters | 9.8 ft

• Electricity: 55 w, 220-240V / 50Hz

• F -type plug for Finland, EU and Russia

• Power cable length 2.3 m

• Housing ABS - plastic

•  Including rough filter

• 21 mm tube connector

• CE and GS certified

• Made in China

• One year Warranty

Never use pump without it being under water.  Sound from pump taking air is the last warning to add water to water tank for plants.
If pump makes sound you should dismantle it and clean the pump Filter and Rotor. If water has much dirt and they are not cleaned time to time pump can run slowly, make noise or even stop working.

This High-quality water pump is ideal for high vertical gardens and green walls. It lifts water up to 7 Plantsteps® and  recycle water in Supragarden® system.

- Max. Lifting capacity of 3 meters | 9.8 ft
- Electricity: 55 w, 110V/60Hz
- A/B -type plug for US, Canada, Mexico & Japan
- Power cable length 2.3 m
- Housing ABS - plastic
-  Including rough filter
- 21 mm tube connector
- CE and GS certified
- Made in China
- One year Warranty

Never use pump without it being under water.  Sound from pump taking air is the last warning to add water to water tank for plants.
If pump makes sound you should dismantle it and clean the pump Filter and Rotor. If water has much dirt and they are not cleaned time to time pump can run slowly, make noise or even stop working.

This High-quality water pump is ideal for green walls and high vertical gardens. It can lift water up to 6 Plantsteps® and to recycle water in Supragarden® system:

- Max. Lifting capacity of 2,7 meters | 8.9 ft
- Electricity: 45 w, 220-240V / 50Hz
- F -type plug for Finland, EU and Russia
- Power cable length 1.3 m
- Housing ABS - plastic
-  Including rough filter
- 13 mm tube connector
- CE and GS certified
- Made in China
- One year Warranty

Never use pump without it being under water.  Sound from pump taking air is the last warning to add water to water tank for plants.
If pump makes sound you should dismantle it and clean the pump Filter and Rotor. If water has much dirt and they are not cleaned time to time pump can run slowly, make noise or even stop working.

This High-quality water pump is ideal for green walls and high vertical gardens. It can lift water up to 6 Plantsteps® and to recycle water in Supragarden® system:

- Max. Lifting capacity of 2,7 meters | 8.9 ft
- Electricity: 45 w, 110V/60Hz
- A/B -type plug for USA, Canada, Mexico & Japan
- Power cable length 1.3 m
- Housing ABS - plastic
-  Including rough filter
- 13 mm tube connector
- CE and GS certified
- Made in China
- One year Warranty

Never use pump without it being under water.  Sound from pump taking air is the last warning to add water to water tank for plants.
If pump makes sound you should dismantle it and clean the pump Filter and Rotor. If water has much dirt and they are not cleaned time to time pump can run slowly, make noise or even stop working.

The ESSENTIALS EC Meter gives direct accurate readings of nutrient solution and is very helpful in mixing nutrient concentrate with hydroponic system water.

All readings are automatically temperature compensated. It is easy-to-use as you can just dip the sensor into the test solution - stir and wait. This unit will deliver a stable reading in about 20 seconds. The meter has a minimum lifespan of about 1 to 3 years depending on the rate of sampling.

The energy saving feature shuts off the tester when it is not in use. The unit also displays a low battery symbol to warn you before it degrades the accuracy of important readings. It has digital calibration at the push of a button and a lit screen for when under dark foliage. It is water and drop resistant. Even if the tester is accidentally dropped into the water it will remain afloat. This means you are able to retrieve the meter immediately without damaging the electronics.

To correct the EC value add clean water or nutrient solution to the water tank. To lower the too high EC value of full water tank, the water must be replaced at least partly with new neutral water.

Look a video on how to use the EC pen:

The pH meter is specially designed for testing the pH level of nutrient solutions. Just dip the sensor into test solution, stir and wait, then read a stable reading in about 20 seconds.

The unit is water resistant, allowing easy washing. Even if the meter is accidentally dropped into the water, it will remain afloat so as to enable immediate retrieval without damaging the electronics.

The energy saving feature shuts off the tester when it is not in use. The unit also displays a low battery symbol to warn you before it degrades the accuracy of important readings. It has digital calibration at the push of a button.

• The LCD dual display shows pH and tempeature readings
• Calibration is easy with a one touch autocalibration and can give upto a 3 point calibartion
• The meter is IP65 waterproof rated

Updated meter mode comes with case and calibration kit >SEE >> HERE

This combined pH & EC Meter gives accurate readings of nutrient solution and is very helpful in mixing right nutrient concentrate for plants with hydroponics and with soil growing.

With this meter you can measure:

• EC meter gives EC / TDC value = the amount of nutrient content in water

• pH meter gives pH value of the water

• water temperature

Features of the combined Ec and ph meter:

• Take the water temperature into account when calculating the measurement result

• Temporarily waterproof, but only immerse the measuring head in the water tank

• The meter is calibrated before sending to the customer

• The pH and EC value of the meter can be adjusted and it is advisable to calibrate the meter every few months using the appropriate calibration agents.

• Includes batteries and adjustment tool for calibration

• One year warranty

How to use EC and pH meter

All meter readings are automatically temperature compensated. It is easy-to-use as you can just dip the sensor into the test solution - stir and wait. This unit will deliver a stable reading in about 10 - 20 seconds.

The EC value of plant nutrient water for e.g. herbs should be 1.2, which in the meter is 120 (= EC 1.2), but the nutrient value can vary between 080-250 for different plants. To adjust the EC value in water; add clean water to lower EC value or to increase EC value add nutrient solution to the water tank. To lower the too high EC value of full water tank, the water must be replaced at least partly with new neutral water.

The pH of plant nutrient water should be about 5.8 (between 5.4 and 6.2). To correct the water pH value  add some pH + or - adjusters that can be found from the store.

CALIBRATION OF THE pH & EC METER
 

EC and pH measurements should be calibrated every few months. There is included screw driver for this with the meter.

Calibrate the meter using pH buffer agents and EC calibrators found in the store.

Calibration of the meter to pH 7

• Open the screw cap on the meter, which shows the batteries

• Use the EC / pH button to select the pH to be measured, the display will show a low PH

• Remove the probe cap, immerse the probe in the pH 7 solution

• Wait for the meter to stabilize, then adjust the meter to 7.00 by turning the small PH screw next to the batteries.

• Rinse the meter head with water and replace the protective cap

 
Calibration of the meter to pH 4

• By also calibrating the meter to pH 4, you ensure that the meter is calibrated over the entire measuring range

• Remove the probe cap, immerse the probe in the pH 4 solution

• Wait for the meter to stabilize, then adjust the meter to 4.00 by turning the small PH screw next to the batteries.

• Rinse the meter head with water and replace the protective cap

EC calibration of the meter

• Open the screw cap on the meter, which shows the batteries

• Select EC to measure with the EC / pH button, the display will read X10 US with a small

• Remove the probe cap, immerse the probe in the EC / CF calibration solution

• Wait for the meter reading to stabilize, then adjust the meter to 280 by turning the small TDC / EC screw next to the batteries.

• Rinse the meter head with water and replace the protective cap

A support Frame and connectors made from aluminium can support four up going Plantsteps:

- Anodized aluminum tube and connectors are resistant to weather and corrosion

- Tube diameter 8 mm

- Color Silver

- Aluminium connectors, 8 pcs

- Rubber band insice tubes make it "Self-assebling" frame

- The top LED-light can be hold up by the Support Frame.

This High-quality water pump for hydroponics is ideal for high vertical gardens and green walls. It can lift water up to 4 Plantsteps® and to recycle water in Supragarden® system.

- Max. Lifting capacity of 2 meters | 6.6 ft
- Electricity: 35 w, 220-240V / 50Hz
- F -type plug for Finland, EU and Russia
- Power cable length 1.3 m
- Housing ABS - plastic
-  Including rough filter
- 13 mm tube connector
- CE and GS certified
- Made in China
- One year Warranty

Never use pump without it being under water.  Sound from pump taking air is the last warning to add water to water tank for plants.
If pump makes sound you should dismantle it and clean the pump Filter and Rotor. If water has much dirt and they are not cleaned time to time pump can run slowly, make noise or even stop working.

This High-quality water pump is ideal for watering high vertical gardens and green walls. It can lift water up to 4 Plantsteps® and to recycle water in Supragarden® system.

- Max. water lifting capacity of 2 meters | 6.6 ft
- Electricity: 35 w, 110V/60Hz
- A/B -type plug for USA, Canada, Mexico & Japan
- Power cable length 1.3 m
- Housing ABS - plastic
-  Including rough filter
- 13 mm tube connector
- CE and GS certified
- Made in China
- One year Warranty

Never use pump without it being under water.  Sound from pump taking air is the last warning to add water to water tank for plants.
If pump makes sound you should dismantle it and clean the pump Filter and Rotor. If water has much dirt and they are not cleaned time to time pump can run slowly, make noise or even stop working.