The combined pH and EC meter also measures the temperature of the water and calculates the exact pH value based on its temperature.

You can accurately calibrate the meter with the three pH calibration powders and EC calibration liquid that come with the meter.

This Hydroponics, aquaponics and swimpool water meter for pH and EC measurements comes with:

• pH 4.01 calibration powder

• pH 6.68 calibration powder

• pH 9.18 calibration powder

• EC 1413 calibration fluid

• batteries AG13

• meter adjustment tool, screwdriver

• storage box for meter, plastic

With the EC / pH / TEMP meter you can measure all the following things that affect the success of aquaculture:

- EC meter = measurement of the EC value of water with an accuracy of 0.01, ie measurement of the nutrient content of the water (measurement of electrical conductivity)

- pH meter = measurement of the pH of water to the nearest 0,01, ie measurement of the acidity of the water

- Water temperature measurement with an accuracy of 0.1 degrees

Features of the combined Ec and ph meter:

• Take the water temperature into account when calculating the measurement result

• Temporarily waterproof, but only immerse the measuring head in the water tank

• The pH and EC value of the meter can be adjusted and it is advisable to calibrate the meter atleast every two months using the appropriate calibration agents.

• One year warranty

How to use EC and pH meter

All meter readings are automatically temperature compensated. It is easy-to-use as you can just dip the sensor into the test solution - stir and wait. This unit will deliver a stable reading in about 10 - 20 seconds.

The EC value of plant nutrient water for e.g. herbs should be 1.2, which in the meter is 120 (= EC 1.2), but the nutrient value can vary between 080-250 for different plants. To adjust the EC value in water; add clean water to lower EC value or to increase EC value add nutrient solution to the water tank. To lower the too high EC value of full water tank, the water must be replaced at least partly with new neutral water.

The pH of plant nutrient water should be about 5.8 (between 5.4 and 6.2). To correct the water pH value  add some pH + or - adjusters that can be found from the store.

CALIBRATION OF THE pH & EC METER
 

EC and pH measurements should be calibrated every few months. There is included screw driver for this with the meter.

Calibrate the meter using pH buffer agents and EC calibrators fluid coming with the meter kit and also found in the store.

Before calibrating the meter, prepare the pH buffer calibration fluids. As instructed in the bag, mix each pH powder in your own bottle with 2½ dl of clean water. You can use this calibration fluid more than once.

Calibration of the meter to pH 6.86

• Open the screw cap on the meter, which shows the batteries

• Use the EC / pH button to select the pH to be measured: meter screen has text pH

• Remove the probe cap, immerse the probe in the pH 6.86 solution

• Wait for the meter to stabilize, then adjust the meter to 6.86 by turning the small PH screw next to the batteries.

• Rinse the meter head with water and replace the protective cap

 
Calibration of the meter to pH 4

• By also calibrating the meter to pH 4, you ensure that the meter is calibrated over the entire measuring range

• Remove the probe cap, immerse the probe in the pH 4 solution

• Wait for the meter to stabilize, then adjust the meter to 4.00 by turning the small PH screw next to the batteries.

• Rinse the meter head with water and replace the protective cap

Calibration of the meter to pH 4.01 and pH 9.18 ensures the result of the calibration

• By also calibrating the meter with pH 4.01 and pH 9.18 fluids, you ensure that the meter is calibrated over the entire measuring range

• Wait for the meter reading to stabilize, then adjust the meter to the default value of 4.01 or 9.18 for each fluid by turning the small PH screw next to the batteries.

• Rinse the meter head with water between measurements and finally replace the protective cap

EC calibration of the meter 1413

• Open the screw cap on the meter, which shows the batteries

• Select EC to measure with the EC / pH button; When meter is not showing pH sign the EC is on.

• Remove the probe cap, immerse the probe in the EC / CF calibration solution

• Wait for the meter reading to stabilize, then adjust the meter to 141 (EC = 1.41) by turning the small TDC / EC screw next to the batteries.

• Rinse the meter head with water and replace the protective cap

CALIBRATION OF THE pH & EC METER
 

EC and pH measurements should be calibrated every few months. There is included screw driver for this with the meter.

Calibrate the meter using pH buffer agents and EC calibrators with this Kit. 

The Kit includes ready-made calibration liquids pH7, pH4 and EC 2.8. In addition, the package includes pH calibration powders, with which you can prepare more pH calibration liquid by adding 250 ml of pure water to the powder, e.g. battery water, which can be obtained inexpensively from car dealerships.

Calibration of the meter to pH 7

• Open the screw cap on the meter, which shows the batteries

• Use the EC / pH button to select the pH to be measured, the display will show a low PH

• Remove the probe cap, immerse the probe in the pH 7 solution

• Wait for the meter to stabilize, then adjust the meter to 7.00 by turning the small PH screw next to the batteries.

• Rinse the meter head with water and replace the protective cap

 
Calibration of the meter to pH 4

• By also calibrating the meter to pH 4, you ensure that the meter is calibrated over the entire measuring range

• Remove the probe cap, immerse the probe in the pH 4 solution

• Wait for the meter to stabilize, then adjust the meter to 4.00 by turning the small PH screw next to the batteries.

• Rinse the meter head with water and replace the protective cap

EC calibration of the meter

• Open the screw cap on the meter, which shows the batteries

• Select EC to measure with the EC / pH button, the display will read X10 US with a small

• Remove the probe cap, immerse the probe in the EC / CF calibration solution

• Wait for the meter reading to stabilize, then adjust the meter to 280 by turning the small TDC / EC screw next to the batteries.

• Rinse the meter head with water and replace the protective cap

about 185 seads

Basil, also called great basil, is a culinary herb of the family Lamiaceae. Basil is native to tropical regions from central Africa to Southeast Asia. It is a tender plant, and is used in cuisines worldwide.

Scientific name: Ocimum basilicum

- wikipedia -

Lettuce seeds - Red Salad Bowls

Lactuca sativa var. crispa

about 710 seads

Red Salad Bowl is a long-standing and early maturing lettuce that grows well all season and can be harvested over period of time. Its maroon-red, deeply cut and finely divided leaves are crisp and delicious and make an eye-catching addition mixed with green lettuce.

Powerful and intelligent growing package: Smart table garden with hydroponics system and Led plant light panel for growing herbs, lettuce, tomatoes and chilies. Always grow fresh edible plants yourself that are free of plant and animal toxins.

Indoor garden features

• two-tier structure in the hydroponic system; below a white water tank with a green plant level on top

• water pump (1A, 5V) integrated in the system circulates water between the water tank and the plant level

• about 7 liters water tank that is enough for watering plants about 1-2 weeks

• the water level meter shows the amount of water in the tank

• the system has an audible alarm that notifies you when the water level in the water tank drops too low

• the package includes a plastic support frame with a height of 50 cm, which supports growing large plants. It can also be used to support plant light

• the package includes three durable planting pots for the plants and they already have vermiculite suitable for rooting seeds or cuttings.

• In the future, instead of vermiculite, 40x40 mm stone wool cubes and hydro-gravel can be used in planting pots, or alternatively directly 75x75 mm stone wool cubes >>> see in the store

• the system is made of food safe materials like ABS plastic

Operating principle of the smart hydroponics system

The water circulates on the system from the white water tank to the green plant level, where the roots of the plant are easily nourished by the moving water and plants grow rapidly. The water circulation can be on all the time or on a timed basis, eg 15 minutes every two hours.

This table garden system has a large water volume of approx. 7.5 liters, which makes the system easy to maintain. The alarm sounds when the water tank level drops too low, ensuring that water is added to the plants in a timely manner.

Aquaculture fertilizers are used in the inner garden >>> see selection

Smart indoor garden kit comes with an adjustable Led growth light

Adjustable LED growth light produces three different light spectrums:

• Full spectrum light suitable for all plants. All LEDs of the lamp are used for this spectrum.

• White light, especially suitable for seedlings, herbs and lettuce in the growing stage. The two type white LEDs of the lamp are used for this.

• Blue and red light suitable for adult flowers and fruit producing plants such as chilies and tomatoes. The blue and red LEDs of the lamp are used for this.

Thanks to the adjustable spectrum and light output, this efficient Led plant lamp is therefore suitable for growing large green house plants and small seedlings, lettuces and herbs, as well as for growing bigger food plants such as chilies and tomatoes.

The Led growing lamp efficiently produces the light needed by the plants and the aluminum frame that acts as the lamp cooler cools the Led lamp efficiently. The surface temperature of the lamp remains below 40 degrees (< 40c) and it does not burn plants even in direct contact. Thanks to passive cooling, the LED lamp designed for growing plants is efficient, cool but silent. The lamp can effectively illuminate a growth space of at least 40 x 75 cm.

Led plant lamp and grow light features

• adjustable color temperature: Full Spectrum, Grow and Bloom, making the lamp suitable for all plants and growth stages

• dimmer - adjustable light output, 9 steps

• Power up to 40 W (80 x 0.5 W led)

• Service life approx. 50,000 hours

• operating temperature - 20 ℃ - + 60 ℃

• 80-265V, 50 / 60Hz

• IP44

• CE and RoHS approved

• The grow lamp has a durable aluminum frame and is 446 mm long, 97 mm wide and 20 mm high.

• The plant lamp has metal legs (approx. 30 cm) and suspension brackets and suspension cables for hanging the lamp

• The led lamp has a timer with which the lamp can be set to switch off / on automatically: 3/24, 9/24 or 12/24 hours a day

• Weight approx. 1 kg

• Warranty year.

How to operate Led lamp for growing plants

How are the different Led lamp spectrums good for growing plants 

SEE MORE PRODUCT INFORMATION BELOW, DESCRIPTIONS OF INDIVIDUAL PRODUCTS INCLUDED IN THE KIT