Two Part Hydroponics Nutrient (1L A + 1L B) for the Finest Results in Hydro Systems.

• Professional plant nutrient developed specifically for vigorous growth and optimum yield when growing in hydroponic systems

• Highly concentrated 2-part formulation

• Optimal NPK ratio for outstanding growth, flowering and fruiting stages

• Exceptional iron availability over a wide pH range

VitaLink Hydro MAX nutrients are highly-concentrated A and B formulations supplied in both Grow and Bloom variants, to supply everything your plants need from transplant to harvest. They have a strong reputation with growers for promoting vigorous, healthy plant growth and achieving maximum yields.

The balanced mixture of macro and micronutrients makes it specially designed for growing in all hydroponic systems. It can be used in recirculating systems (deep water culture, NFT, aeroponics, flood & drain, etc.), as well as in run-to-waste hydroponic systems due to its unique stability. It is suitable for use with all inert media, including clay pebbles, perlite, rock-wool and mapito.

VitaLink Hydro MAX nutrients contain everything your plants need to flourish. Fulvic acid and chelated micro nutrients improve your plants uptake of nutrient solution resulting in better photosynthesis and vigorous growth and flowering. Iron is chelated with EDDHA, making it available over a wide pH range so your plants will never starve for this element -even in periods of high-demand. Iron is necessary to produce chlorophyll – which is essential for photosynthesis.
Instructions for use:

Always check the water quality in your area and ensure you are using the right variant – either hard water or soft water. In very soft water areas we recommend a half strength VitaLink CalMag supplement (0.5ml/L) during growth stage.
Always use equal amounts of A and B to prepare your nutrient solution. If required, adjust the pH level. Recommended pH range 5.8-6.5. Shake well before use.

Hydro MAX Bloom A+B:

Use both A and B at 3-4 ml/liter of water

We recommend that you always maintain at least the minimum recommended dose rate for your plants stage of development. The base feed is the foundation of healthy plant growth. Carefully selected additive use can then maximize this potential – but it can never replace it.

VitaLink’s range of nutrients do not adversely affect the flavour of herbs, vegetables, salad, fruits and other plants grown for consumption.

Enhance your plants growth by using VitaLink additives alongside Hydro Max A and B Grow and Bloom nutrients.

SupraStart is made for hydroponic growing and is good for most flowering plants. Product is rich with water soluble phosphorus that is promoting the growth of the young plant roots immediately after germination. Good roots help plants grow faster and also to handle the short drought seasons better. Phosphorus also contributes to the development of new flower buds at a later grow stages.

NPK 11-16-10 with 1.2% Mg and micro elements for young plants
Amount: 500g is for average 500 liters of plant nutrient water in hydroponics system.

Dosage:

The average dosage is 0.1% meaning 1g of nutrients to one liter of plant water. Best dosage for plants depends on plant species and growth stage but it typically varies between 0.04 - 0.20%. That is 4-20 g of nutrient to each 10 l water added to hydroponics system.

Lear more about use of SupraStart and other hydroponic fertilizers for different plants >>

To make use of powder fertilizer easier with hydroponics system:

Make first a 10% Liquid Mix by adding 100g nutrient powder to one liter of warm (20-40 Celsius) water. Store Liquid Mix in cool and dark place. Add ready made Liquid Mix to all new plant water according to nutrient quide.

SupraGrow is great base nutrient for growing food plants with hydroponic system. It is also good hydroponic base fertilizer for growing household plants with hydroponics.

NPK 8-6-30 + 2.4% Mg + Micronutrients

(with USA type NPK  8-13-36 including oxides)

All the N is in form of Nitrate Nitrogen (NO3-N) that is best for hydroponics. 

Content: 500g is for more than 500 liters of hydroponics plants nutrient water.

Fully water soluble SupraGrow is especially great for fruit plants. Due to the low nitrogen levels, it is suitable for strawberry and raspberry plants, and particularly to tomato, cucumber, peppers and chilies. Nutrient formula is enriched with magnesium and micronutrients that improve fruit taste.

You can easily add the amount of nitrogen (NO3-N) by using SupraNitro together with SupraGrow. This way you have combination that is excellent for lettuce and herbs and for all plants growing big leafs and plant body.

Dosage:

The average dosage is 0.1% meaning 1g of nutrients to one liter of plant water. Best dosage for plants depends on plant species and growth stage but it typically varies between 0.04 - 0.20%. That is 4-20 g of nutrient to each 10 l water added to hydroponics system.

Lear more about use of SupraGrow and other hydroponic fertilizer for different plants >>

To make use of powder fertilizer easier with hydroponics system:

Make first a 10% Liquid Mix by adding 100g nutrient powder to one liter of warm (20-40 Celsius) water. Store Liquid Mix in cool and dark place. Add ready made Liquid Mix to all new plant water according to nutrient quide.

Flowering nutrient SupraBloom is great fertilizer for growing plants in hydroponics and you can expesically use bloom fertilizer for growing the flowers and fruit plants.

NPK: 0-23-29

Same as PK 13/14, but twice as strong

Dosage: 500g is for about 500 liters of plant nutrient water

With SupraBloom the increase of phosphorus and potassium to nutrient water helps plants to grow flowers and increase sugar content to fruits and to prepare plants them for autum.

Dosage:

The average dosage is 0.1% meaning 1g of nutrients to one liter of plant water. Best dosage for plants depens on plant species and growth stage but it typically waries between 0.04 - 0.20%. That is 40-200 g of nutrient to 100 l water.

Make first a 10% Liquid Mix by adding 100g nutrient powder to one liter of warm (20-40 Celsius) water. Add 1 dl of Liquid Mix to every 10 liters of new plant water. This nutrient dosage is now around 0,1%.

Learn more about use of SupraBloom and other plant nutrients here...

SupraNitro is a plant nutrient for hydroponic use and expecially when the increase of Nitrogen (N) and Calsium (Ca) is needed.

In SupraNitro, almost all nitrogen is in the form of nitrate (NO3) suitable for hydroponics, allowing plants to directly utilize it.

NPK 16-0-0, Ca 19%

Of what N:

• Nitrate nitrogen (NO3-N) 14.4%
• Ammonium nitrogen (NH4-N) 1.1%

Additionally: 19% Calsium

Amount: 500g is for 500 liters of plant nutrient water

Why and how to add nitrogen and calcium to plants in hydroponics?

Nitrogen makes it possible to plant to have strong growth and have dark green, strong and vibrant leafs. 

Calcium prevents deficiency symptoms - such as tomatoes having rotten heads and salads hafing leaf edge burn.

SupraNitro is generally used as supplement nutrient to SupraGrow, SupraBloom or SupraStart when extra nitrogen is needed.

Dosage:

The average dosage is 0.1% meaning 1g of nutrients to one liter of plant water. Best dosage for plants depens on plant species and growth stage but it typically waries between 0.04 - 0.20%. That is 40-200 g of nutrient to 100 l water.

Make first a 10% Liquid Mix by adding 100g nutrient powder to one liter of warm (20-40 Celsius) water. Add 1 dl of Liquid Mix to every 10 liters of new plant water. This nutrient dosage is now around 0,1%.

Lear more about use of SupraNitro and other fertilizer for plants in hydroponics...

SupraMgS is completely water soluble and expecifically good for adding magnesium ( 10% Mg) and Sulfur (13% S) for plants.

Magnesium Sulfate, Epsom Salt gives the plants a dark green color and is a great supplement for fruit plants. Especially tomatoes and chillies grow larger and taste better, sweeter.

Quantity: 500 g is sufficient for about 2500 liters of irrigation water.

SupraMgS is generally used as a supplement with SupraGrow, SupraBloom or SupraStart nutrients.

Dosage:

The average dosage is 0.02% meaning 2g of nutrients to ten liters of plant water. Best dosage for plants depens on plant species and growth stage but it typically waries between 0.01 - 0.03%. That is 1-3 g of nutrient to 10 l water.

Make first a 10% Liquid Mix by adding 100g nutrient powder to one liter of warm (20-40 Celsius) water. Add verage 20 ml of Liquid Mix to every 10 liters of new plant water. This nutrient dosage is now around 0,02%.

Learn more about use of SupraMgS and other plant nutrients here...
 

Hydroponics nutrients and powdered fertilizers for hydroponic cultivation of herbs, salads and the most common green plants

The nutrient package contains A and B hydro fertilizer in powder form:

• SupraMix A fertilizer 2x 100g

• SupraNitro+ B fertilizer 2x100g

A total of 400g.

NPK: 12 - 3 - 13 

This is enough for approx. 400 liters of plant irrigation water in the hydroponics system.

First, make A mother solution and seperate B mother solution from nutrient powders by mixing a 100g serving bag with a 1 liter bottle of warm water. Put A bag to one bottle and B bag to other bottle. 

When adding plant water add first A mother solution, mix and then add B mother solution to the water tank according to the dosing instructions. The mother solutions must not meet before adding them to the water tank, so that they do not react with each other.

Dosing instructions for hydroponic nutrient

The dosage of the amount of nutrients depends on the growth stage of the plants:

1. Seed germination and cuttings (0-2 weeks)

Add 25 ml of A mother solution (2.5 g powder) and 25 ml of B mother solution to every 10 liters of new plant water. The EC value of this nutrient solution is about 0.5.

Seed germination also starts without nutrients and you can only add nutrients to the water when the seeds have already made the first leafs.

2. Larger seedlings and mature plants

Add 50 ml of mother solution A (5 g of powder) and 50 ml of mother solution B to every 10 liters of new plant water.

The strength of this nutrient solution, EC, is about 1.5, which is a good amount of nutrients for herbs and green plants, but can be e.g. a bit too strong for a salad. A 75% nutrient solution and an EC value of 1.2 is sufficient for lettuce.

Nutrient concentrations  

A - SupraMIX

NPK: 7 - 5 - 25  (without oxids)
in addition: 3.3% Mg, 4.3% S and trace elements

B - SupraNitro+

NPK: 17 - 0 - 0

N 17%
in addition: 24% Ca

of which N:

Nitrate nitrogen (NO3-N) 16.7%

Ammonium nitrogen (NH4-N) 0.3%

With this nutrient package for hydroponics, almost all nitrogen is in nitrate form (NO3), which is suitable for hydroponics use, so that the plants can utilize nitrogen it directly from the water.

By combining 50% SupraMix A and 50% SupraNitro B aquaculture nutrient, the nutrient concentrations are obtained:

NPK: 12 - 3 - 13

the values are NPK % proportions without oxides, which are used in most foreign fertilizers.

in addition: 1.7% Mg, 12% Ca and 2.2% S

Suitable EC nutrient values for aquaculture nutrients for different plants:

- EC 2.5, tomato and chili for growing max. 3.0
- EC 1.5, Basil amd the most common greens and houseplants
- EC 1.0 - 1.2, Salads, Lettuce and spice herbs

See here for a more extensive nutrient guide with more detailed instructions and a wider selection of fertilizers for fertilizing different plants (e.g. tomato, chili, strawberry) and their different growth stages in aquaculture.

The same hydroponics nutrient can also be used for soil cultivation, but at approx. 75% strength (add approx. + 25% pure water) and use the nutrient only every second watering.

See a more comprehensive nutrition guide and more nutrients for the fertilization of various plants and their growth phases with Hydroponics systems.

BioBizz Top Max organic flowering strengthener

There are three excellent reasons to use this 100% organic flowering strengthener. First, it contains ingredients that can help increase the actual size and weight of the flower clusters. Second, nutrient uptake is improved. And third, plants grown with Top·Max result in sweeter, smooth tasting crops. How it activates the flow of nutrients is essentially down to how it’s able to free up the mineral’s calcium, iron and magnesium in the soil, which stimulate the plant’s metabolism.

How to use Top-Max?

Top·Max™ can be used during the complete flowering period and works especially well combined with Biobizz substrate mixtures.

• In the first weeks of growth, we advise a dose of 1ml per litre of water.
• As harvest approaches and before flushing – when the nutrient solution is replaced with plain water to improve the taste and texture of the crop – the dose can be increased to 4ml per litre of water.

Composition of Top Max from Bio Bizz:

• Nitrogen 0,1%

• Phosphorus 0,01%

• Potassium 0,1 %

• Iron 0,009%

• Zinc 0,004%

• Molybdenum 0,001%

• Boron 0,011%

The benefits of humic and fulvic acids in Top·Max™. Top·Max™ is incredibly effective because of the humic acids it contains. The main source of these is an ancient substance in the soil called Leonardite. This comes from prehistoric trees and vegetation that flourished during the carboniferous period, 300 million years ago.

Fulvic acids also possess particular properties that contribute to healthy floral growth. These acids are taken from exceptionally rich sources of humate deposits found deep within the earth. Their natural electrical charge attracts nutrients and minerals present in both the microbiological soil base and applied organic fertilizers. Humic and fulvic acids work together to boost the energy in old plant cells while stimulating new ones to form.

VitaLink RootStim | Riotous roots

Seaweed based root stimulant. Increases and improves root growth and development.

Contains high quality seaweed extracts containing natural stimulants and hormones. VitaLink RootStim contains Ascophyllum nodosum (seaweed) extract, a high quality extract containing natural stimulants and hormones. It is harvested from seaweed during the optimum period of the year to harness its finest nutritional properties. Includes carefully selected oligosaccharides to support the establishment of strong roots.

RootStim stimulates roots to grow stronger, longer and increases the formation of root hairs. Better roots mean better nutrient and water uptake, resulting in more vigorous growth and increased resistance to environmental stress.

VitaLink RootStim is designed for use especially in the early stages of plant life when it encourages rapid root growth and formation of new roots, eases the stress from transplanting and provides plants with the best possible conditions for further development

RootStim Usage instructions:

Use VitaLink RootStim at 1-2 ml/L, from transplant and throughout growth stage.

Use alongside main nutrient. If required, adjust the pH. Recommended pH range 5.8-6.5. Shake well before use.

VitaLink’s range of additives are specially designed to give optimum results when used alongside VitaLink nutrients.

Ideal for use in hydroponics and all systems and medias.

The seed Propagator provides the ideal environment for raising seedlings and cuttings. It is humidity and air temperature controlled via adjustable ventilation panels and has a durable clear cover. It is impact resistant and light with a long life base tray in which you can plant directly or in seed trays and pots.

You can use thise Stonewool cubes 21/28 pcs. with tray on the propagator